After performing a visual inspection of the bodywork of the vehicle a few areas of concern were brought to light.Starting with the panels of the car it is apparent that there is some warpage and incorrect shaping to both of the doors, this will be remedied by straightening and shrinking the stretched material back t the correct shape. Small dents are present in the boot lid and bonnet, these will also need to be shrank and massaged back to their original contours.The roof appears to have some pitting present in numerous areas, these are covered with a primer but I hope that we will be able to rectify this issue by cleaning back and properly treating the metal without the need for any replacement.Moving onto the front wings there are patches of previous repair work on both at the lower sections that will need to be correctly repaired by removing these and replacing them with correctly fabricated panels and fitted in a way as to make the panel follow its original contours and blend seamlessly.The rear left quarter panel is mis shaped and showing signs of corrosion and will potentially be best repaired by replacing the panel in its entirety. the rear right rear quarter is in a lot better condition and would benefit from some additional shaping potentially using lead.Finally corrosion and pitting has been discovered on the windscreen reveal and the grill surround.